Tile - Floor/Wall
Johns Manville
Tile Backerboard
GoBoard® by Johns Manville is an ultra-lightweight, waterproof and durable tile backer board that is easy to cut and install.
or Give us a Call
Product Summary
GoBoard is engineered and tested for strength and durability, yet can be cut right where it’s installed using a utility knife. Plus, it's up to 80% lighter than traditional boards. Installation time is reduced because waterproofing is built-in, eliminating extra steps since only board joints and fastener locations need to be sealed.
Construction and Materials
Johns Manville offers a range of tile backer boards designed for various construction applications. These products serve as a stable and moisture-resistant substrate for tile installations on floors, walls, and ceilings. The core of these backer boards is typically composed of materials like fiberglass-faced gypsum or cementitious compounds, providing durability and preventing moisture ingress, which is crucial for preventing mold and mildew growth in wet areas such as bathrooms and kitchens.
The construction of Johns Manville tile backer boards prioritizes ease of installation and long-term performance. They are engineered to be lightweight and dimensionally stable, reducing the likelihood of cracking or warping over time. The surfaces are often treated to enhance adhesion, ensuring a strong bond between the backer board and the tile adhesive. This robust construction makes them suitable for use in both new construction and renovation projects.
Materials Used:
- Core Material: Depending on the specific product line, the core can be manufactured from:
- Fiberglass-reinforced gypsum
- Cementitious compounds
- Facings: The boards are typically faced with alkali-resistant fiberglass mesh or a specialized fiberglass mat. This facing provides:
- Enhanced surface strength
- Improved adhesion for tile thin-set
- Protection against moisture penetration
- Additives: Certain formulations may include additives to enhance specific properties such as fire resistance or water repellency.
The range of Johns Manville tile backer boards caters to different project requirements. Some products are specifically designed for high-moisture environments, offering superior water resistance. Others are engineered for enhanced impact resistance or acoustic dampening. The specific composition and features of each backer board are tailored to meet the demands of various building codes and performance expectations for tile installations.
Features and Benefits
Johns Manville offers a robust solution for tile installations with their specialized tile backer boards. Designed to provide a stable and moisture-resistant foundation, these products are essential for ensuring the longevity and performance of your tiled surfaces in both floors and walls.
The core advantage of Johns Manville tile backer boards lies in their ability to create a superior substrate for tile. Unlike traditional materials like drywall or plywood, which can be susceptible to moisture damage and deterioration, Johns Manville backer boards are engineered for durability and resistance to the elements commonly found in wet areas such as bathrooms, kitchens, and laundry rooms.
Key features and benefits include:
- Moisture Resistance: The materials used in Johns Manville tile backer boards offer excellent protection against water and humidity. This prevents mold, mildew, and rot, safeguarding the integrity of the wall or floor structure behind the tile.
- Dimensional Stability: These boards provide a rigid and stable surface that resists warping, swelling, or cracking. This stability is crucial for preventing tile cracking and grout failure, ensuring a consistently smooth and even finish.
- Ease of Installation: Johns Manville backer boards are designed for straightforward application. They can be easily cut, handled, and fastened, streamlining the installation process and potentially reducing labor costs.
- Versatility: Suitable for a wide range of applications, including shower walls, bathtub surrounds, kitchen backsplashes, and flooring installations, these boards offer a reliable base for various tile types.
- Improved Tile Adhesion: The uniform and stable surface of the backer board promotes optimal adhesion for tile thin-set mortar, leading to a more secure and longer-lasting tiled installation.
The core advantages of utilizing Johns Manville tile backer boards are the creation of a durable, long-lasting tiled surface, the prevention of moisture-related issues, and the assurance of a professional, high-quality finish. By providing a dependable substrate, these products mitigate common installation problems, contributing to the overall success and aesthetic appeal of the tiled area.
Options-Styles
This product is a tile backer board designed for use on floors and walls, falling under the categories of Tile Backer Board and Tile Backerboard for Walls & Finishes. It is manufactured by Johns Manville.
Style and Options
Johns Manville offers various options for their tile backer boards, designed to meet diverse project needs and installation requirements. The primary distinction often lies in the material composition and performance characteristics.
- Cement Board: A common and robust option, cement board provides a stable and moisture-resistant substrate for tile installations. It is known for its durability and ability to withstand damp environments, making it suitable for bathrooms, kitchens, and other wet areas. The composition typically involves cement, aggregates, and reinforcing materials.
- Perforated Cement Board: Some cement board products may feature perforations. These small holes allow for better adhesion of thin-set mortar, creating a stronger bond between the backer board and the tile, especially in demanding applications.
- Fiberglass Faced Cement Board: This variation incorporates a fiberglass mesh embedded within or applied to the surface of the cement board. This facing enhances its structural integrity, crack resistance, and provides an excellent surface for adhering thin-set mortar, further improving the bond with the tile.
- Foam Core Backer Board: Johns Manville may also offer backer boards with a rigid foam core sandwiched between fiberglass-reinforced cementitious facings. These boards offer excellent thermal insulation properties in addition to being a stable substrate for tile. They are lightweight, easy to cut and install, and provide superior moisture resistance.
- Thickness Options: To accommodate different installation scenarios and substrate requirements, these backer boards are typically available in various thicknesses, such as 1/4-inch, 1/2-inch, and 5/8-inch. The chosen thickness depends on factors like the type of tile being used, the substrate it's being attached to, and local building codes.
- Edge Profiles: While not always a primary distinguishing feature for backer boards, some products might offer specific edge profiles designed for easier seam treatment and integration with adjacent materials.
Key Product Features
- Moisture Resistance: Essential for tile applications, Johns Manville backer boards are engineered to resist moisture, preventing issues like mold, mildew, and degradation of the substrate.
- Dimensional Stability: The materials used ensure that the backer board remains stable and does not warp or crack under typical environmental conditions, providing a reliable foundation for tile.
- Ease of Installation: Products are often designed for straightforward cutting and fastening, making the installation process efficient for both professionals and DIYers.
- Surface Preparation: The surfaces of these backer boards are typically designed to accept thin-set mortar and other tile adhesives effectively, ensuring a strong and lasting bond with the tiles.
- Compatibility: They are formulated to be compatible with a wide range of tile types, including ceramic, porcelain, glass, and natural stone.
- Homepage
- Products
- Specifications
- Instructions
- About Us
- Video
-
Green - Environmental
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Tile - Floor/Wall and Walls products.
Mohawk
Ceramic Tile
Mohawk Ceramic offers a broad array of products including floor tile, wall tile, mosaics and decorative tiles. From glazed floor to Colorbody™ porcelain tile, Mohawk has a…
or Give us a Call
Product Summary
Since color and design are so important in creating the right look for your home, Mohawk Ceramic has taken special care to create products that offer the right blend of colors, sizes, textures and finishes to express your individuality. Whether designing a Mediterranean villa or a contemporary loft, Mohawk Ceramic has the products you're looking for.
Construction and Materials
Mohawk offers a diverse range of ceramic floor and wall tiles, designed to bring both aesthetic appeal and durability to any space. These tiles are crafted from natural clay, water, and other minerals, fired at extremely high temperatures to create a dense, hard, and non-porous surface. This manufacturing process results in a product that is exceptionally resistant to moisture, stains, scratches, and wear, making it an ideal choice for high-traffic areas and environments prone to spills or dampness.
The construction of Mohawk ceramic tiles typically involves several stages. The raw materials are carefully selected, ground into a fine powder, and mixed with water to form a slurry. This slurry is then pressed into the desired tile shapes under high pressure. Following this, the tiles are dried and then fired in large kilns. Many of Mohawk's ceramic tiles also feature a glaze applied before the final firing. This glaze can be plain or decorative, offering a wide array of colors, patterns, and textures. The glazing process not only enhances the tile's appearance but also provides an additional layer of protection and is crucial for its water resistance and ease of cleaning.
Mohawk's ceramic tile collections are designed with versatility in mind, suitable for a multitude of applications:
- Flooring: Durable and resilient, Mohawk ceramic tiles are an excellent option for kitchens, bathrooms, entryways, living rooms, and basements, providing long-lasting beauty and performance.
- Walls: Beyond flooring, these tiles are also designed for wall applications, offering a stylish and practical solution for backsplashes in kitchens, shower surrounds in bathrooms, and accent walls throughout the home.
The materials used in Mohawk ceramic tiles are fundamentally natural and earth-derived, ensuring a product that is both robust and aesthetically pleasing. Key components include:
- Clay: The primary raw material, providing the foundational structure of the tile.
- Water: Essential for creating the workable slurry during the manufacturing process.
- Minerals: Various naturally occurring minerals are incorporated to enhance specific properties like strength, color, and texture.
- Glazes: A protective and decorative coating, often composed of glass-forming minerals, fluxes, and pigments, fired onto the tile surface.
Mohawk's commitment to quality is reflected in the meticulous construction and selection of materials for their ceramic tile products, offering homeowners and designers a reliable and beautiful surface solution.
Features and Benefits
Discover the enduring beauty and exceptional performance of Mohawk ceramic tile, a cornerstone of sophisticated and durable flooring and wall solutions. Mohawk ceramic tile offers a perfect blend of aesthetic appeal and robust functionality, designed to elevate any space within your home or commercial environment.
Engineered with meticulous attention to detail, Mohawk ceramic tile provides a versatile canvas for your design aspirations. Available in a stunning array of colors, patterns, and finishes, these tiles can seamlessly complement any interior design style, from classic and traditional to modern and minimalist. Whether you envision a serene spa-like bathroom, a chic and inviting kitchen, or a grand entryway that makes a lasting impression, Mohawk ceramic tile delivers unparalleled design flexibility.
Beyond its captivating aesthetics, Mohawk ceramic tile is celebrated for its exceptional durability and resilience. Ceramic is inherently resistant to moisture, stains, and scratches, making it an ideal choice for high-traffic areas and environments prone to spills and wear. This inherent strength ensures that your Mohawk tile installation will maintain its pristine appearance for years to come, requiring minimal maintenance.
Features and Benefits:
- Aesthetic Versatility: A wide selection of colors, patterns, and finishes to match any décor.
- Exceptional Durability: Highly resistant to scratches, stains, and moisture, ensuring long-lasting beauty.
- Low Maintenance: Easy to clean and care for, making it ideal for busy households.
- Moisture Resistance: Perfect for bathrooms, kitchens, and other areas exposed to water.
- Enhanced Value: Adds a touch of luxury and sophistication, potentially increasing property value.
- Ease of Installation: Designed for straightforward installation, suitable for both DIY enthusiasts and professional contractors.
- Timeless Appeal: Ceramic tile offers a classic and enduring aesthetic that never goes out of style.
The core advantages of choosing Mohawk ceramic tile lie in its unmatched combination of aesthetic appeal, robust durability, and practical ease of maintenance. This makes it a wise investment for homeowners and designers seeking a flooring and wall solution that is both beautiful and built to last. Experience the peace of mind that comes with knowing your surfaces will withstand the demands of daily life while continuing to enhance the ambiance of your space.
Options-Styles
Mohawk offers a diverse range of ceramic floor and wall tiles, designed to bring both beauty and durability to any space. Their collections are crafted with meticulous attention to detail, catering to a variety of aesthetic preferences and functional needs.
The style of Mohawk's ceramic tile selections encompasses a broad spectrum, from classic and timeless designs to contemporary and on-trend options. You can find tiles that mimic the natural beauty of stone, the rich warmth of wood, or the intricate patterns of classic ceramics. The finishes available often include matte, polished, and textured surfaces, allowing for versatility in achieving the desired look and feel for your project.
Available Styles and Options
- Natural Stone Mimicry: Collections that replicate the authentic look and veining of natural stones such as marble, granite, slate, and travertine. These options provide the elegance of natural stone with the practical benefits of ceramic.
- Wood-Look Tile: A popular choice for achieving the warmth and texture of hardwood floors with the resilience and easy maintenance of ceramic tile. These tiles come in various wood species looks, plank lengths, and finishes.
- Classic Ceramic & Porcelain: Timeless designs featuring solid colors, subtle textures, and decorative patterns that have been a staple in home design for decades.
- Modern & Contemporary: Sleek designs with clean lines, geometric patterns, and bold color palettes that suit modern interior aesthetics.
- Mosaic Tiles: Intricate and decorative mosaic tiles are available in various materials and arrangements, perfect for accent walls, backsplashes, and unique flooring designs.
- Textured & Structured Tiles: Tiles with raised patterns, tactile surfaces, or dimensional designs that add depth and visual interest.
- Large Format Tiles: Increasingly popular for creating a seamless look with fewer grout lines, especially in larger spaces.
- Small Format & Specialty Tiles: Options like subway tiles, hex tiles, and penny tiles offer classic charm and can be used for intricate patterns or as decorative accents.
Installation and Application
Mohawk ceramic tiles are suitable for a wide range of applications, including:
- Flooring: Durable and water-resistant, making them ideal for kitchens, bathrooms, entryways, and high-traffic areas.
- Walls: Perfect for backsplashes in kitchens, shower surrounds in bathrooms, and feature walls throughout the home.
- Indoor and Outdoor Use: Specific collections are designed to withstand outdoor elements, offering consistent style from indoor to outdoor living spaces.
Key Features
When choosing Mohawk ceramic tiles, you can expect features such as:
- Durability: Ceramic tiles are known for their strength and resistance to wear and tear.
- Water Resistance: Excellent for moisture-prone areas like bathrooms and kitchens.
- Ease of Maintenance: Simple to clean and maintain, making them a practical choice for busy households.
- Variety of Finishes: From high-gloss polished surfaces to natural matte textures, allowing for diverse design possibilities.
- Color Stability: Mohawk tiles are designed to retain their color over time, resisting fading from sunlight.
- Homepage
- Products
- Ideas, Tips & Tools
- Maintenance
- Instructions
- Warranty
- About Us
- Video
-
Green - Environmental
- Product Availability and Pricing Click here for details
-
Similar Products
- See all our Tile - Floor/Wall products.